Multi-turn electric valve actuator

Detailed Product Description

Multi-turn electric valve actuator

Type

Rated torque Nm

Rated speed r/min

Rated travel r

1-phase 220V

3-phase 380V

A-10/K03

A-10/F03

100

3.3

3,    3.5

A-10/F05

A-10/F05

100

4.8

5,      7

A-

Code

B-

Code

C-

Code

/

The maximum output torque, numbers that, unit: Nm

K

Power codesignal phase220V/50Hz

F

Power code3- phase 380V/50Hz

Output shaft speed, number of that unit; r / mm

Rated travel time, number of that unit; S

L

Control Characteristics

2 Type

Unsigned

The overall proportion of type 4-20mA

S

Discrete proportional 4-20mA

Y

Remote control-type

 

      

 

 

Description:

    

 Main Technical Performance:

 The following technical performance mainly refers to the proportion of adjustable type, on the far-controlled and the switching of the following 1,2,3,4,5,6,11,12,13,14 did not concern.

 1, input signal: 4mA-20mA DC or 1V-5V DC;

       2, enter the channel resistance; 250Ω;

       3, input channel number: 1 (discrete formula 3);       

 4, the basic error: ± 1, ± 2.5%;       

 5, hysteresis: 1%, 1.5%;       

 6, dead-0.5-3% (can be set according to system requirements);   

 7, damping properties: no swing

 8, power supply voltage: single phase 220V (+10%, -15%) 50Hz ± 1%

 Three-phase 380V ± 10% 50Hz ± 1%

 9, the working environment: temperature: Integral -10 - +55 ; discrete -25 - +70 ;

 Humidity: ≤ 85%, ambient air does not contain corrosive substances;

 10, shell protection grade; meet GB4208 IP65 (dust or rain);

 11, broken signal protection functions: preset There are three ways: a, in situ, b, fully open, c,

     Fully closed;

       12, over-current protection function: pairs of different types of models, to protect current value adjustable; (mechanical

           Some have had moments Protection Switch)

 13, the dynamic electrical braking function;

       14, the ceiling and the lower limit function: at rated travel within the range of upper and lower limits adjustable

           About 40%; (mechanical parts of a stroke control switches and mechanical limit)

 15, the working system; reversible intermittent working system, connected to sustained rate of 50% per hour, the number of connected

     1200 times.